Request Information
TURKEY: +90 505 682 2102 | BRAZIL: 55.19.3816-8218 | EU: 359 2 4801900 | CHINA: 86-21-36120226 | INDIA: 91 9624009994 | CALL USA: 631.467.6814

Heating a steel fastener with induction

///Heating a steel fastener with induction
Heating a steel fastener with induction2018-07-16T12:05:33+00:00

Heating magnetic steel

Objective
Heat the threads of a 178mm (7”) long magnetic steel fastener to 760C (1400F) in less than 10 seconds.

Equipment
SM-2 Power Supply
HS4W Heat Station

Materials
• 178mm (7”) long magnetic steel screw, Thread length measures 102mm (4”), approximately 6.4mm (0.25”) thick.

Key Parameters
Power: 1.5kW to 2.0kW
Temperature: 760C (1400F)
Time: 7.5 sec.

Results / Benefits:

The steel fastener was successfully heated to 760C (1400F) in 7.5 seconds with a standard 2kW unit. Heat time can be further reduced if heating a smaller length of the fastener and by using an optimized coil design.

Pictures

Video

Request information or contact us about this application. Reference info: Application Note 3463-4745

Contact Us