WATER COOLING System
- Designed and tested to operate with wide range of induction systems
- Low maintenance requirements
- Low noise pump and fans ensure quiet operation
- Small volume and foot print

FEATURES
- Corrosion resistant polyethylene cooling tank equipped with convenient filling spout and visible water level
- Non-ferrous material construction eliminating coolant contamination due to electrolysis or chemical reaction
- Polyamide pipes plumbing rated for 10 bar (145 PSI)
- On/Off power switch with pilot light
- Closed loop water system for efficient cooling through a high-pressure pump and heat exchanger
- Reliable and simple to maintain
- Low noise brass-body rotary gear pump with extended life
- Adjustable output pressure for custom applications
- Air and fluid filters for incrased reliability
WCA-1000-02 (1ACC-900-100-00) Cooler, 3kW,10.000BTU,230V,1ph |
|
Line Voltage |
230 VAC +/-10% (single phase) |
Line Frequency, kHz |
50 / 60 Hz |
Input Current max. |
1.5 A |
Input Power max. |
0.3 kVA |
Cooling power max. |
3 kW (10000 BTU) |
Cooling capacity | 102W/ °C temp differentiol (Tin fluid – Tamb) |
True cooling power | (Tin fluid – Tamb) * 102W/ °C |
Output pressure default |
3.5 bar (50 PSI) |
Output pressure max. |
6 bar (87 PSI) |
Coolant flow rate max. |
5 L/min |
Plumbing terminals Inlet / Outlet |
1/4 BSPP (G 1/4) Female |
Coolant tank capacity |
25 L / 6.6 gal |
Module Dimensions W x D x H in/(cm) |
12” x 28” x 19.1” 33 x 71,5 x 50 |
Weight kg (lb) |
30 kg. / 66.1 lb |