» 1 Is the machine centrifugal or pressure casting machine?
» 2 Can you navigate me with instructions on what my first steps should be?
» 3 Can I buy Pentaform from you?
» 4 How much time should the burnout process last?
» 5 Do you have any videos to help me?
» 6 Do you have open flame during the casting process?
» 7 Is there a minimum water flow requirement?
1. Q: Is the machine centrifugal or pressure casting machine?
A: UltraCast is a pressure casting machine.
2. Q: Can you navigate me with instructions on what my first steps should be?
A: Yes, please take a look here: Documentation. There you can find our Quick Guide.
3. Q: Can I buy Pentaform from you?
A: Yes, of course you can.
4. Q: How much time should the burnout process last?
A: Strictly follow the instructions of the Manufacturer of the investment material.
5. Q: Do you have any videos to help me?
A: Yes, please navigate to our video section on our site or you can click here
6. Q: Do you have open flame during the casting process?
A: No, there is no open flame during the casting process, induction heating is used.
7. Q: Is there a minimum water flow requirement?
A: Yes, the minimum water flow requirement is 2L/min(0.5GPM).
Please note, that there is also requirement for the pressure – minimum differential pressure of the cooling water 3Bar(45PSI), maximum input pressure 6Bar(90PSI).