Objective
Heating Iron Coated Nanotube Sheets
Recommended Equipment
The recommended equipment for this application is the UPT-W10/150 power supply with the HS-8LF heat station.
Materials
Iron Coated Nanotube Sheets, 30% to 40% iron loading by volume
Power: 2.96 kW
Temperature: 100°C
Time: 30 seconds
Materials
Iron Coated Nanotube Sheets, 30% to 40% iron loading by volume
Power: 2.96 kW
Temperature: 100°C
Time: 15 seconds
Results and Conclusions:
The iron coated nanotube sheets heated to 100°C. The samples were pressed down to prevent movement caused by the magnet field. The thinner material curled and broke up into pieces but the thicker material was left intact. The lab equipment used was an W10/150 unit but an SM5/200 or an SH2/350 with an HS4 heat station is recommended for the job.
Pictures
Video Test 1
Request information or contact us about this application. Reference info: Application Note 3463-4951