Objective
Braze with induction various size copper, brass and stainless steel parts. Customer is currently using a furnace and torch and is looking for better quality and process control.
Recommended Equipment
The recommended equipment for this application is the UPT-W10/150 power supply with the HS-8LF heat station.
Test 1
Materials
Customer Drawing
Power: 4.1kW
Temperature: 840°F-850°F (448°C-454°C)
Time: 12 seconds
Test 2
Materials
Customer Drawing
Power: 5.11kW
Temperature: 840°F -850°F (448°C-454°C)
Time: 10 seconds
Test 3
Materials
Customer Drawing
Power: 4.09kW
Temperature: 840°F-850°F (448°C-454°C)
Time: 8 seconds
Test 4
Materials
Customer Drawing
Power: 5.49kW
Temperature: 840°F-850°F (448°C-454°C)
Time: 18 seconds
Results and Conclusions:
A 5 kW system is suitable for the tested parts. The fixturing of parts is required for repeatability and clean results.
Pictures
Video Test 1
Video – Test 2
Video – Test 3
Video – Test 4
Request information or contact us about this application. Reference info: Application Note 3463-4883