» 1 Can you regulate the emissivity?
» 2 Do you have thermo reader?
» 3 Is the Vacuum-Argon washing cycle available in SuperCast?
» 4 Do we need a crucible tong to take the crucible safe out of the machine?
» 5 Do you have a guide for casting Titanium with SuperCast?
» 6 What type of Oil do you use in your Vacuum Pump?
» 7 Is there a minimum water flow requirement?
1. Q: Can you regulate emissivity?
A: Yes, we have this feature built in.
2. Q: Do you have a thermo reader?
A: Yes, we have an accurate temperature reader with an advanced thermoregulator.
3. Q: Is the Vacuum-Argon washing cycle available in SuperCast?
A: Yes, SuperCast has the Vacuum-Argon washing cycle feature.
4. Q: Do we need a crucible tong to take the crucible safe out of the machine?
A: Yes, crucible tongs are a crucial part of the safe operation of the machine.
5. Q: Do you have a guide for casting Titanium with SuperCast?
A: Yes, we have a guide to help you with casting Titanium. You can find it on Guide for Casting Titanium.
6. Q: What Oil do you use in your Vacuum Pump?
A: A: The oil we use is DVP BV 32 (Viscosity at 40 оС – 32 (cSt); Max. Operating temperature – 120 оС; Flash point – 195 оС;)
You can also use one of these substitutes:
1/ ESSO – INVAROL EP46;
2/ SHELL – TELLUS T32;
3/ Q8 – HAENDEL 32;
7. Q: Is there a minimum water flow requirement?
A: Yes, the minimum water flow requirement is 2 l/min (0.5GPM).
Please note, that there is also a requirement for the pressure – minimum differential pressure of the cooling water 3Bar(45PSI), maximum input pressure 6Bar(90PSI).</