ID Heating of an Insert Valve Intake

Objective
Heat the inside of an Intake Valve Insert to 1292°F (700°C) in 18 seconds with induction.

Recommended Equipment
The recommended equipment for this application is thе UPT-SM5/200 & HS-4 heat station

Materials
Alloy steel 1.38″ (35 mm) ID, 1.72″ (43.6 mm) OD, 0.26″ (6.6 mm) thick

Key Parameters
Power: Up to 5 kW
Temperature: 1292°F (700°C)
Time: 18 seconds

Pictures

Video

Request information or contact us about this application. Reference info: Application Note 3463-5093

Contact Us