Objective
Heat part to approximately 1600-1800°F (871-982°C) in under 5 minutes with 10 kW machine. This test will show induction heating will replace torch heating and take less time than current torch process.
Equipment
Ultra Heat W15
HS8
Materials
• Copper tube
• Aluminum form
• Compression fittings
Key Parameters
Power: 5.54 kW cold/ 9.85 kW post curie
Temperature: 1600-1800°F (871-982°C)
Time: 4 minutes
Process:
- Position part into coil and center the part 2. Start power cycle and heat for 4 minutes to reach approximately 1800°F (982°C).
Results/Benefits:
Part heated to temperature fairly even across 4 inch heat zone in 4 minutes.
Pictures
Video
Request information or contact us about this application. Reference info: Application Note 3463-4397