» 1 Can I buy a spare pair of crucible tongs?
» 2 Do you provide a Screwdriver system “ZERO” with the machine?
» 3 Do you have a spacer for saddle 19mm?
» 4 Do you have other spacers for CS1?
» 5 What is the biggest saddle available for CS3?
» 6 What is the minimum quantity platinum to be melted?
» 7 Is there a minimum water flow requirement?
» 8 Do you have a maintenance list document?
A: Yes! We can provide you with spare crucible tongs.
A: Correct, we provide you with Zero Screwdriver.
A: Yes, we have spacer for saddle 19mm, it is intended for CS1 machine.
A: Yes, we have another spacer for CS1, it is the following: Spacer for saddle 34mm.
A: The biggest spacer we have for CS3 is Flask saddle 80×120mm.
A: The minimum required quantity is different for the different machines. For CS1 it is 90g, for CS2 – 190g and for CS3 – 250g.
A: Yes, the minimum water flow requirement is 2L/min(0.5GPM).
Please note, that there is also requirement for the pressure – minimum differential pressure of the cooling water 3Bar(45PSI), maximum input pressure 6Bar(90PSI).
A: Yes, we have an Annual maintenance list CS Series. You can find the file here