Objective
Braze stainless steel tubes to copper tubes. Objective is to evaluate induction brazing solution. Customer is looking to reduce defects and for a cleaner brazing environment.
Due to different pipe size and lower volume – evaluation is performed with a UBraze system.
Results and Conclusions:
Induction brazing test with UBraze was able to braze the parts in 9 to 11 seconds for the full braze cycle.
Operator training with this setup will be minimal.
Pictures
Video Test 1
Video – Test 2
Request information or contact us about this application. Reference info: Application Note 3463-5087