<< BACK

» 1 What is the operating frequency of the machines?
» 2 Are the machines operating on three-phase electrical power?
» 3 Do the machines have an internal water cooling system?
» 4 Do you have different types of flasks available?
» 5 Are there tongs for the flask with a flange?
» 6 Do you have a video of PressCast casting process?
» 7 Is there a minimum water flow requirement?

Support Request

PressCast Series

1. Q: What is the operating frequency of the machines?

A: The operating frequency for both PressCast 3G and 5G is 6kHz.

2. Q: Is the machine operating on three-phase electrical power?

A: Yes, the machines are operating on three-phase electrical power.

3. Q: Do the machines have an internal water cooling system?

A: No, the machines don’t have internal water cooling system.

4. Q: Do you have different types of flasks available?

A: Yes, there are two types available – with and without flange.

5. Q: Are there tongs for the flask with a flange?

A: Yes, there are tongs specifically designed for the flask with a flange.

6. Q: Do you have a video of PressCast casting process?

A: Yes, you can find it here: PressCast videos.

7. Q: Is there a minimum water flow requirement?

A: Yes, the minimum water flow requirement is 3L/min(0.8GPM).
Please note, that there is also a requirement for the pressure – minimum differential pressure of the cooling water 3Bar(45PSI), maximum input pressure 6Bar(90PSI).