Hardening Flange Groove

Harden a flange groove to 1508˚F (820˚C) in 3 minutes using induction heating.

Recommended Equipment
The recommended equipment for this application is the
UPT-W15/150 & HS-8 heat station


42CrMoS4 – 1.14” thick x 2.69” ID x 4.61” OD (29 mm
thick x 68.4 mm ID x 117 mm OD)

Key Parameters

Hardness: 52.9 HRC
Power: Up to 15 kW
Temperature: 1508˚F (820˚C).
Time: 3 minutes



Request information or contact us about this application. Reference info: Application Note 3463-5065

Share This Page, Choose Your Platform!