Objective
Use induction to melt a special coating onto the blade edge of steel knives.
Equipment
W15/150 Power Supply
HS-8 Heat Station
Materials
• Steel knives
• 4-turn pancake coil
Key Parameters:
Power: 2.6kW
Time: 4 min
Process:
- Start the power supply.
- Position the knife into the coil.
- Move the knife through the coil.
Results and Conclusions:
The coating was successfully melted onto the blade edge of the knife with induction heating.
Pictures
Video
Request information or contact us about this application. Reference Info: Application Note 3464-4604.