Heat part to approximately 1600-1800 in under 5 minutes with 10 KW machine. This test will show induction heating will replace torch heating and take less time than current torch process.
• Copper tube
• aluminum form
• compression fittings.
Power: 5.54 KW cold/ 9.85 KW post curie
Temperature: 1600-1800 °F (871-982°C)
Frequency: 61 kHz cold/ 66 kHz post curie
Time: 4 minutes
- Position part into coil and center the part.2. Start power cycle and heat for 4 minutes to reach approximately 1800F.
Part heated to temperature fairly even across 4 inch heat zone in 4 minutes.