brazing custom parts

Objective
Braze with induction various size copper, brass and stainless steel parts. Customer is currently using a furnace and torch and is looking for better quality and process control.

Recommended Equipment
The recommended equipment for this application is the UPT-W10/150 power supply with the HS-8LF heat station.

Test 1

Materials
Customer Drawing

Power: 4.1kW
Temperature: 840°F-850°F (448°C-454°C)
Time: 12 seconds

Test 2

Materials
Customer Drawing

Power: 5.11kW
Temperature: 840°F -850°F (448°C-454°C)
Time: 10 seconds

Test 3

Materials
Customer Drawing

Power: 4.09kW
Temperature: 840°F-850°F (448°C-454°C)
Time: 8 seconds

Test 4

Materials
Customer Drawing

Power: 5.49kW
Temperature: 840°F-850°F (448°C-454°C)
Time: 18 seconds

Results and Conclusions:

A 5 kW system is suitable for the tested parts.  The fixturing of parts is required for repeatability and clean results.

Pictures

Video Test 1

Video – Test 2

Video – Test 3

Video – Test 4

Request information or contact us about this application. Reference info: Application Note 3463-4883

Contact Us